IMS-HPS100: PTP / SyncE / Hardware NTP Interface with Dual Core CPU
Key Features
- !High Performance Dual Core CPU
Compatible with the Meinberg IMS Platform - High Power Dual Core CPU
- USB 2.0 full-speed, Micro USB
- LED status indicators for init, error and PTP mode
- Data Link Layer: Layer 2 / Layer 3 / E2E / P2P
- 1-Step or 2-Step Master/Slave operation
- SyncE - Synchronous Ethernet
- 8 ns Time Stamp Accuracy
- Multi-Profile Support
(Default, Power, Telecom, SMPTE) - Gigabit Ethernet SFP/RJ45 Combo Port
- 2 SMA Outputs for 1PPS,10MHz or 2048kHz
-
Previous Models - IMS-HPS100:
TSU-GbE :: PTP / SyncE / Hardware NTP Interface
Product Description
The ability to select Master and Slave operation for either Default, Power, Telecom or SMPTE profile makes this product the most flexible PTP solution on the market, suitable for a wide range of applications.
A lot of IEEE 1588 slave devices or NTP clients from different market segments can be synchronized, even over IPv6 networks, for example eNodeBs for LTE base stations, Linux servers running high-frequency trading applications, IEEE 1588 compatible IEDs in Smart Grid environments or IP-interconnected Audio / Video devices in TV or Radio studios.
The Synchronous Ethernet function provides a highly accurate frequency transport over Ethernet networks. The card can be used either to take a SyncE signal from the network as a source or to generate SyncE as a Master.
Characteristics
Supported PTP Profiles |
Custom Profile
Default:
|
Operating Mode |
|
NTP Mode | NTP Server Mode (8 ns timestamp accuracy)
NTPD Software Service (15,000 req./s). The ntpd software service can run parallel to the PTP service. |
1588 Clock Mode | 1-Step or 2-Step Master/Slave operation |
PTP Modes | Multicast/Unicast Layer 2 (IEEE 802.3)
Multicast/Unicast Layer 3 (UDP IPv4/IPv6) Hybrid Mode E2E / P2P Delay Mechanism Up to 128 messages/second per client |
Synchronous Ethernet | Master and Slave Capability
Compliant to ITU-T G.8261, G.8262 and G.8264 Ethernet Synchronization Messaging Channel (ESMC) |
Processor Type | 825 MHz Cortex A9 Dual Core on SOC |
Network Protocols | IPv4, IPv6
DHCP, DHCPv6 DSCP IEEE 802.1q VLAN filtering/tagging IEEE 802.1p QOS |
Output signal | 2x SMA (50 Ohm) connectors
Configurable signals: 1 PPS, 10 MHz, 2048 kHz |
Available Network Connectors |
Combo Port: *
1 x 100/1000BASE-T RJ45 1 x GBIT SFP - Slot * The two network connectors are dedicated to a single physical interface. |
Supported Models | Can be used in all IMS LANTIME models (MRI, ESI or IO slot). |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Warranty | Three-year warranty |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
- For drivers, SDKs, tools and utilities, please check our Download Section